Accessories, Optional equipment, Warning – Lincoln Electric PIPELINER 200 User Manual
Page 56
ACCESSORIES
CCC-2
CCC-2
PIPELINER® 200G
OPTIONAL EQUIPMENT
(FIELD INSTALLED)
(K704) Accessory Set
Includes 35 ft (10.7m) electrode and 30 ft (9.1m) work
cables, headshield, work clamp, and electrode holder.
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc welder
for pipe thawing is not approved by the CSA, nor is
it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
(K924-4) REMOTE CONTROL
For machines having Code Number 10660:
For “Stick” operation which contains switch, remote
control rheostat and 100 ft (30.5m) or 25 ft (7.6m)
cable. Easy Installation.
(K924-5) REMOTE CONTROL
For machines having Code Number 10913:
For “Stick” operation containing remote control rheostat
and 100 ft (30.5m) cable. Easy Installation.
REMOTE CONTROL (K2464-1) -
Contains
remote control rheostat (for adjusting the CC “STICK”
OCV), remote control potentiometer (for adjusting the
CV “WIRE” OCV), and 100 ft. (30.5m) cable. Easy
Installation.
(K953-1) TRAILER
- Two-wheeled trailer with
optional fender and light package. For highway use,
consult applicable federal, state, and local laws regard-
ing possible additional requirements. There is a choice
of 2 hitches, a fender & a light package. Order:
K953-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-1 Fender & Light Kit
K965-1 Cable Rack
(K623-1) WIRE FEED MODULE
-Provides con-
stant voltage (CV) output with improved arc stability for
Innershield welding. Also, excellent for MIG welding.
Easy Installation. Recommended wire feeder is the
LN-25.
(K2261-1) OIL DRAIN KIT-
Includes ball valve,
hose and clamp.
WARNING