Optional equipment – Lincoln Electric PRECISION TIG 275 SVM162-B User Manual
Page 33
C-3
ACCESSORIES FOR CODES ABOVE 11000
C-3
PRECISION TIG 275
OPTIONAL EQUIPMENT
FACTORY INSTALLED OPTIONS
The basic Precision TIG 275 machine is factory
equipped with:
• A 3/8" Adapter (S20403-4) for air cooled torch con-
nection of a PTA-9 or PTA-17.
Accessories that are factory installed with the
Domestic model (K1826-1) to make up the Domestic
Welding Package (K1825-1) include:
• K1828-1
Under-Cooler Cart
• 3100211
Harris Argon Flow Regulator with 10ʼ
Hose.
• K870 Foot Amptrol
• K1784-4
25ʼ PTW-20 water-cooled TIG Torch
• K918-2
Zippered Torch Cover
• KP510
Parts Kit for Torch
• K2150-1
Work Lead Assembly
See below for more detailed descriptions.
FIELD INSTALLED OPTIONS
The following Options/Accessories are available for the
Precision TIG 275 and are installed per instructions in
this manual and / or provided in the package:
• K2621-1 Precision TIG Advanced Control Panel
Provides 2/4-step trigger with adjustable Pulser
controls and Down slope timer for TIG welding. Also
includes adjustable Hot Start and Arc Force internal
panel controls for Stick welding, and other user
selectable features.
• K1828-1 Under-Cooler Cart
Includes a "cooler-in-a-drawer" with hoses and a
lockable storage drawer on a dual bottle undercar-
riage (see below).
• K1869-1 Undercarriage
Includes a dual bottle rack with chain and an under-
carriage with 5" front casters,10" rear wheels and a
handle.
• K1830-1 Water Solenoid Kit
Provides for stopping flow of external water supply.
Connects to coolant inlet and cooler receptacle of
Precision TIG.
(Cannot be used with a water cooler.)
• K870 Foot Amptrol
Single pedal foot activation of arc start switch and
output control, with 25ʼ plug cable.
• K963-3-3 Hand Amptrol
Fastens to torch for convenient thumb activation of
arc start switch and output control, with 25ʼ plug
cable:
• K814 Arc Start Switch
Needed for TIG welding without an Amptrol. Includes
25ʼ plug cable, and attaches to torch for convenient
finger control.
• K1831-1 Power Factor Capacitor Kit
Used when welding at higher output currents to
reduce input current and help keep electricity costs
to a minimum.
• Magnum® PTA and PTW Series Torches
All Air Cooled or Water-Cooled Magnum® TIG
Torches may be used with the PRECISION TIG 275.
Connection adapters are only required for Air-Cooled
Torches (Refer to Diagrams on A-7):
K2166-1 7/8” Torch Connector for PTA-26 (one
piece)
K2166-2 1/2” stud Connector for PTA Torch (two-
piece).
K2166-3 3/8” TIG Torch Connector for PTA-9,-17
(one piece). (Included as S20403-4 with Precision
TIG models.)
• 3100211 Harris Argon Flow Regulator (Includes 10ʼ
hose.)
• K2150-1 Work Lead Assembly
15ft. 2/0 cable with 1/2" stud lug and work clamp.