Lexicon RV-8 - Manual (Page 11)

RV-8 Getting Started
1-5
PRODUCT REGISTRATION
Please register the RV-8 Receiver within 15 days of purchase.
Register online at www.lexicon.com or complete and return the
product registration card attached to the back cover of this user
guide. Retain the sales receipt as proof of warranty coverage.
INSTALLATION CONSIDERATIONS
The RV-8 requires special care during installation to ensure optimal
performance. Pay particular attention to instructions below and to
other precautions that appear throughout this user guide.
D O install the RV-8 on a solid, flat, level surface such as a table or
shelf. The RV-8 can also be installed in a standard 19-inch
equipment rack using an optional rack-mount kit available from an
authorized Lexicon dealer.
D O select a dry, well-ventilated location out of direct sunlight.
D O N OT expose the RV-8 to high temperatures, humidity, steam,
smoke, dampness or excessive dust. Avoid installing the RV-8 near
radiators or stacking the RV-8 over other heat-producing
equipment such as a power amplifier.
D O N OT install the RV-8 near unshielded TV or FM antennas, cable
TV decoders, or other RF-emitting devices that might cause
interference.
D O N OT place the RV-8 on a thick rug or carpet, or cover the RV-8
with a cloth, as this might prevent proper cooling.
D O N OT place the RV-8 on a windowsill or any location exposed to
direct sunlight.
D O N OT obstruct the front-panel IR receiver window. The remote
control must be in line of sight with the IR receiver for proper
operation.
D O N OT install the RV-8 on a surface that is unstable or unable to
support all four feet.
CAUTION!
Before moving the RV-8, power the unit off using the rear-
panel power switch and unplug the power cord from the
wall outlet.