Lexicon RV-8 - Manual (Page 50)

Setup Lexicon
3-2
SETUP
Selecting SETUP from the MAIN MENU opens the SETUP menu.
INPUTS
Prompts the selection of a desired input (e.g., DVD1) and opens the
corresponding INPUT SETUP menu, which is used to change input
names, assign audio and video input connectors, select preferred
listening modes and configure Main Zone and Zone 2 input settings.
See “INPUT SETUP” on page 3-4 for more information.
SPEAKERS
Opens the SPEAKER SETUP menu, which is used to configure the
Main Zone audio output connectors for the desired speaker setup,
set speaker distances and calibrate output levels. See “SPEAKER
SETUP” on page 3-25 for more information.
I/O CONFIG
Opens the I/O CONFIG menu, which is used to configure the analog
audio input connectors as eight stereo connectors, one 5.1-channel
and five stereo connectors, or two stereo and two 5.1-channel
connectors. It can also be used to configure the amplifier outputs.
See “I/O CONFIGURATION” 3-60 for more information.
DISPLAYS
Opens the DISPLAY SETUP menu, which is used to customize the on-
screen and front-panel displays, restore audio/video synchronization,
and create and activate a custom unit name. See “DISPLAY SETUP”
on page 3-63 for more information.
VOLUME CONTROLS
Opens the VOLUME CONTROL SETUP menu, which is used to configure
Main Zone, Mute, Zone 2, Zone 3 and Headphone volume levels. See
“VOLUME CONTROL SETUP” on page 3-68 for more information.
TRIGGER
Opens the TRIGGER SETUP menu, which is used to configure the
trigger output connector labeled 1. See ”TRIGGER SETUP” on page
3-70 for more information.
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
LIVE! CALIBRATION
SETUP
TUNER SETUP
POWER MANAGEMENT
SETUP INPUTS
SPEAKERS SETUP
I/O CONFIG SETUP
DISPLAYS SETUP
VOLUME CONTROLS SETUP
TRIGGER SETUP