Mode adjust – Lexicon RV-8 User Manual

Page 164

Advertising
background image

Mode Adjust

Lexicon

6-22

DOLBY DIGITAL & DOLBY DIGITAL EX

These listening modes are designed to decode and play back 5.1
discrete channels from 5.1-channel Dolby Digital sources. The five
main channels are full-frequency. The .1 channel, often referred to
as LFE information, has a limited frequency range of 120Hz.

The mode name differs, depending on the encoding present in the
input source, the EX DECODING parameter setting and the speaker
setup.

The Dolby DIGITAL EX listening mode is recommended for Dolby
Digital sources recorded with Dolby Digital Surround EX
encoding. This listening mode can also be used with other types
of 5.1-channel Dolby Digital sources with mixed results. The table
at the bottom of the page shows the conditions for the behavior
of the Dolby Digital EX mode when activated.

The Dolby DIGITAL EX listening mode is available when both the
side and rear speakers are present and Dolby Digital Surround EX
decoding is activated. Matrix decoding is then applied to derive a
surround back channel from the other surround channels.

Dolby Digital Surround EX decoding is activated when the EX
DECODING parameter is set to ON or AUTO and a flagged
5.1-channel Dolby Digital source recorded with Dolby Digital
Surround EX encoding is detected.

Dolby Digital Surround EX decoding is not activated when the
EX DECODING parameter is set to OFF or AUTO and a non-
flagged 5.1-channel Dolby Digital source recorded with or
without Dolby Digital Surround EX encoding is detected.

Note:

The RV-8 cannot detect Dolby Digital Surround EX encoding in non-
flagged 5.1-channel Dolby Digital input sources because they do not
include information in the input signal that identifies Dolby Digital
Surround EX encoding.

MODE ADJUST

OR

DIGITAL EX

DIGITAL

Parameter

Default Setting

Possible Settings

EX DECODING

AUTO

AUTO, ON, OFF

COMPRESSION

OFF

AUTO, ON, OFF

LFE MIX

+0.0dB

–10.0 to +0.0dB

OUTPUT LEVELS

Refer to page 6-37

CUSTOM

Refer to page 6-37

Input Source

Parameter Setting

5.1-Channel Dolby Digital

5.1-Channel Surround EX

(Flagged)

5.1-Channel Surround EX

(Non-Flagged)

EX DECODING: AUTO

DOLBY DIGITAL

DOLBY DIGITAL EX

DOLBY DIGITAL

EX DECODING: ON

DOLBY DIGITAL EX

DOLBY DIGITAL EX

DOLBY DIGITAL EX

EX DECODING: OFF

DOLBY DIGITAL

DOLBY DIGITAL

DOLBY DIGITAL

Advertising