Setup, Front l/r, Center – Lexicon RV-8 User Manual

Page 79

Advertising
background image

RV-8

Setup

3-31

FRONT L/R

FULL, FULL + SUB, 30 to 120HZ, THX 80HZ

Assigns a crossover point for the Main Zone audio output connectors
labeled Front L/R when a custom speaker setup is selected. Opens the
FRONT L/R SPEAKERS menu to select a crossover point for the Front
L/R output connectors.

Select FULL to send a full-range signal to the front speakers.
Otherwise, select the crossover point closest to the low-
frequency rating of the front speakers.

Select FULL + SUB to send a full-range signal to the front
speakers and duplicate bass frequencies to the SUB output.
(The set crossover point of the SUB parameter determines the
upper range of duplicate bass.) Selecting the FULL + SUB
option can result in excessive bass.

When THX speaker setup is selected, a THX 80Hz crossover point is
applied to the Front L/R output connectors, and the FRONT L/R
parameter cannot be adjusted.

CENTER

FULL, FULL + SUB, 30 to 120HZ, THX 80HZ, NONE

Assigns a crossover point for the Main Zone audio output connector
labeled CENTER when a custom speaker setup is selected. Opens the
CENTER SPEAKER menu to select a crossover point for the CENTER
output connector.

Select FULL to send a full-range signal to the center speaker.
Otherwise, select the crossover point closest to the low-
frequency rating of the center speaker.

Select FULL + SUB to send a full-range signal to the center
speaker and duplicate bass frequencies to the SUB output. (The
set crossover point of the SUB parameter determines the upper
range of duplicate bass.) Selecting the FULL + SUB option can
result in excessive bass.

When the speaker setup does not include a center speaker, select
NONE to redirect center channel signals to the Front L/R output
connectors – unless the 5.1a BYPASS listening mode is activated. In
this case, configure the speaker setup with the associated DVD-A/
SACD player to redirect center channel signals.

When THX speaker setup is selected, a THX 80Hz crossover point is
applied to the Center output connector, and the CENTER parameter
cannot be adjusted.

SPEAKERS

SETUP

CUSTOM SETUP

FRONT L/R

SET CROSSOVERS

SPEAKERS

SETUP

SET CROSSOVERS

THX SETUP

SPEAKERS

SETUP

CUSTOM SETUP

CENTER

SET CROSSOVERS

SPEAKERS

SETUP

SET CROSSOVERS

THX SETUP

Advertising