Lexicon RV-8 - Manual (Page 57)

RV-8 Setup
3-9
ANLG IN LVL AUTO, –18dB to +12dB
Opens the ANLG IN LVL menu, which is used to adjust the 2-channel
analog audio input levels for the selected input. Despite attempts at
standardization, analog audio sources have a wide range of levels. To
compensate for this, the RV-8 allows independent input level
adjustment for each of its stereo and multichannel analog audio
input connectors, phono input and the internal tuner. Input level
adjustment is not available when analog bypass is on.
* This parameter cannot be adjusted.
Note:
Adjustments made in the ANLG IN LVL menu are applied to the analog
audio input connector assigned for the selected input, these adjustments
are automatically applied to the new connector.
ON
OFF
DVD1 ANLG IN LVL
AUTO
AUTO GAIN
ON
+0.0dB
+0.dB MANUAL
-18 to +12dB
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
MIC
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
LIVE! MED
MAIN ADVANCED
ZONE2 IN
DIGITAL
ZONE2 ADVANCED
5.1a FILM 5.1a
INPUT SETUP
DVD2
TV
SAT
VCR
CD
TUNER
PHONO
DVD1
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
LIVE! CALIBRATION
TUNER SETUP
dB
0
-6
-15
-30
-45
R L
POWER MANAGEMENT
INPUTS SETUP DVD1 ANLG IN LVL
Parameter Possible Settings
AUTO ON, OFF
MANUAL –18 to +12dB
AUTO GAIN* –18 to +12dB