Lexicon RV-8 - Manual (Page 122)

Setup Lexicon
3-74
TUNER SETUP (continued)
AUTOLOAD
Automatically scans and stores presets for the currently selected
frequency band.
To select the AUTOLOAD option, highlight AUTOLOAD in the TUNER
SETUP menu and press the right (
) arrow. The message “PRESS
RIGHT TO START AUTOLOAD” appears in the on-screen and front-
panel displays.
• To cancel the AUTOLOAD command, press the left ( ) arrow.
• AUTOLOAD skips presets with previously stored values and uses
the next available preset.
• Once all available stations have been scanned, or if any TUNER
button is pressed (including the remote’s buttons), AUTOLOAD
will stop.
• To autoload stations from the other frequency band, select that
band and restart AUTOLOAD.
Note:
Presets are saved when the unit is powered down. Because the
AUTOLOAD function preserves any existing presets, consider using the
CLEAR ALL function before using AUTOLOAD. Note that some channels
may be repeated in the preset section if AUTOLOAD is used more than
once since the last CLEAR ALL.
PRESS RIGHT J
TO START AUTOLOAD
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
TUNER SETUP
REGION
SCAN SENS
AUTOLOAD USA
LOW
LOCK OPTIONS
CLEAR ALL SETUP
LIVE! CALIBRATION
TUNER PRESETS
DISPLAY
RADIO TEXT
SCROLL RATE
AUTO FREQUENCY
RDS NAME
ON
MEDIUM
ON
POWER MANAGEMENT
SETUP TUNER SETUP AUTOLOAD