Lexicon RV-8 - Manual (Page 231)

RV-8 Appendix C
C-13
ERASING FAVORITE CHANNEL BUTTONS
To erase favorite channel buttons:
1. Go to the SETUP mode by pressing both the HOME and ENT
buttons simultaneously for three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the FAV button.
4. To erase all the favorite channel buttons in the RV-8 remote, press
the ALL button and then press the SURE? button at the next LCD
screen.
5. To erase one button, press the KEY button. Press the individual
button you want to erase and continue with any other individual
buttons you want to erase.
6. Repeat from Step 5 to erase any favorite channel buttons.
7. Press the HOME button to exit to main Erase mode.
8. Press the HOME button once again to exit the SETUP mode.
ERASE MACRO FUNCTIONS FROM DEVICE BUTTONS
To erase macro function from device buttons:
1. Go to the SETUP mode by pressing the HOME and ENT buttons
simultaneously for three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the MACRO button.
4. Press the KEY button.
5. Press one of the 10 DEVICE buttons from which you wish to erase
the macro function. Once the device button has been pushed the
macro has been erased. The LCD will flash “ERASED!”
6. Exit from Macro mode by pressing the HOME button and then
exit from SETUP mode by pressing the HOME button once again.
ERASING PUNCH THROUGH FUNCTIONS
To erase “punch through” functions:
1. Go to the SETUP mode by pressing the HOME and ENT buttons
simultaneously for three seconds.
2. Press the PUNCH button next to the LCD screen.
3. Press the VOL button for Volume Punch Through, the PLA button
for Transport Punch Through or the CH button for Channel Punch
Through.
4. Press the device button from which you wish to erase Punch
Through.
5. Press the same device button again.
6. Punch through is erased when the same device button is pressed
the second time.
7. Repeat from step 2 to erase the Punch Through for other devices.
8. Exit from Punch Through mode by pressing the HOME button and
then exit from the SETUP mode by pressing the HOME button
once again.
EDIT TEXT ON FUNCTION/DEVICE BUTTONS
To edit text on function or device buttons:
1. Enter the SETUP mode by pressing the HOME and ENT buttons
simultaneously for three seconds.
2. Press the EDIT button next to the LCD screen.
3. Press the DEVICE button to display the function buttons for that
device.
4. Press the function button on which you wish to write or edit text.
You can also go to the second page of the device by press ing the
PAGE button.