Lexicon RV-8 - Manual (Page 24)

Basic Operation Lexicon
2-12
For example, if Preset #01 is FM 90.90 and the call letters are WABC,
then the name for that position is WABC. If Preset #23 does not
broadcast their call letters, then that location is identified as Preset23 in
the menu.
EDITING PRESETS
It is possible to customize the name of each preset on the RV-8.
To edit the preset name:
1. Select TUNER PRESETS from the MAIN MENU. The TUNER
PRESETS menu contains a list of preset pages. PAGE 1 contains
presets 1 through 10, PAGE 2 contains presets 11 through 20, etc.
2. Select the page containing the desired preset.
A list of presets appears.
3. Select the desired preset.
The EDIT PRESET menu opens and displays the preset call letters
(or PS), frequency, and band.
The EDIT PRESET menu options are as follows:
• Select LISTEN TO PRESET to load the preset frequency.
• Select NAME to customize the preset name. The preset name
can be up to eight characters long.
• Select CLEAR PRESET to clear the frequency and band informa-
tion from the preset.
See “Tuner Presets” on page 5-2 for additional information.
AUTOLOAD
The RV-8 can automatically scan and store presets. This can be
accomplished only from the remote control. See “Tuner Setup
(continued)” on page 3-74 for additional information.
To start autoloading:
1. Select AUTOLOAD from the MAIN MENU : SETUP : TUNER SETUP
menu.
2. Press menu to start AUTOLOAD.