Lexicon RV-8 - Manual (Page 126)

Setup Lexicon
3-78
TUNER SETUP (continued)
AUTO FREQUENCY ON, OFF
Checks for alternate frequency broadcasts in case of station drop out
or signal fade. The default setting is ON. Many radio stations
broadcast on several frequencies simultaneously. When active, AUTO
FREQUENCY checks for these alternate frequency broadcasts when
signal failure is detected.
If the main frequency drops out and AUTO FREQUENCY is activated,
the volume will mute briefly until the alternate broadcast is received.
AUTO FREQUENCY will only switch to a new frequency when
the following conditions are met:
• The main frequency signal starts to fade.
• The channel identification of the alternate frequency is an exact
match of the currently selected frequency.
• The alternate frequency detected has a stronger signal strength
than the currently selected frequency.
• The AUTO FREQUENCY feature is ON.
ON
OFF
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
TUNER SETUP
REGION
SCAN SENS
AUTOLOAD USA
LOW
LOCK OPTIONS
CLEAR ALL SETUP
LIVE! CALIBRATION
TUNER PRESETS
DISPLAY
RADIO TEXT
SCROLL RATE
AUTO FREQUENCY
RDS NAME
ON
MEDIUM
ON
POWER MANAGEMENT
SETUP TUNER SETUP AUTO FREQUENCY