Lexicon RV-8 - Manual (Page 63)

RV-8 Setup
3-15
2-CH
Opens the 2-CH MODE menu, which is used to select a preferred
listening mode for 2-channel input sources. The RV-8 activates the
selected listening mode whenever a 2-channel source is present.
When the 2-CH parameter is set to USE LAST:
The RV-8 activates the listening mode that was activated the last time
a 2-channel source was present
The remote control 2 CH button toggles between the 2-CHANNEL
listening mode and the previous listening mode, and ignores the USE
LAST setting. Instead, it uses the listening mode (for example, L7
FILM) that was activated before the 2-CHANNEL listening mode.
The RV-8 activates a DTS NEO:6 listening mode if a DTS NEO:6
listening mode was activated the last time a 2-channel source was
present, and a 44.1kHz or 48kHz PCM digital source is present. Since
the DTS NEO:6 listening modes are dynamic, they cannot be
selected as the preferred listening mode for 2-channel sources.
DOLBY D
Opens the DOLBY DIGITAL MODE menu, which is used to select a
preferred listening mode for Dolby Digital input sources. The RV-8
activates the selected listening mode whenever a new input is
selected or a new Dolby Digital source is present.
When the DOLBY D parameter is set to USE LAST:
The RV-8 activates the listening mode that was activated the last time
a Dolby Digital source was present
The RV-8 activates the Dolby PLIIx MOV (Movie) listening mode if
this listening mode was activated the last time a Dolby Digital source
was present. Since Dolby PLIIx MOV is a dynamic listening mode, it
cannot be selected as the preferred listening mode for Dolby Digital
sources.
INPUTS SETUP DVD1 2-CH INPUTS SETUP DVD1 D