Lexicon RV-8 - Manual (Page 56)

Setup Lexicon
3-8
ASSIGNING AUDIO and VIDEO INPUT CONNECTORS (continued)
ANALOG IN ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8), PHONO, TUNER, NONE, LIVE!
Opens the ANALOG IN menu, which is used to assign an analog
audio input connector for the selected input. The RV-8 has eight
configurable inputs, each of which can be assigned to any of its eight
analog audio input connectors.
The appearance of the ANALOG IN menu depends on the configu-
ration of the analog audio input connectors.
• The ANALOG IN menu (A above) appears when the I/O CONFIG
menu 8 STEREO INPUTS option is selected (see page 3-60).
• The ANALOG IN menu (B above) appears when the I/O CONFIG
menu 5 ST. & 5.1 ANLG option is selected (see page 3-61).
• The ANALOG IN menu (C above) appears when the I/O
CONFIG menu 2 ST. & (2) 5.1 ANLG option is selected (see
page 3-61).
Please note the following:
• When no analog audio input connector is assigned, the RV-8
automatically sets the MAIN ADV menu INPUT SELECT
parameter to DIGITAL (see page 3-17).
• An analog audio input connector must be assigned when no
digital audio input connector is assigned. Refer to the previous
page for information about assigning a digital audio input
connector.
• The PHONO input corresponds to the built-in phono
connector.
• The TUNER input corresponds with the internal AM/FM radio
tuner.
• LIVE! cannot be selected until LIVE! CALIBRATION is run. When
the ANALOG IN selection is LIVE!, the digital input selection is
disabled for this input until a different analog input is selected.
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
ANALOG-3
ANALOG-4
ANALOG-5
ANALOG-6
ANALOG-7
ANALOG-8
PHONO
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
ANALOG-3
ANALOG-4
ANALOG-5
5.1 ANLG (6-8)
PHONO
A
B
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
5.1 ANLG (3-5)
5.1 ANLG (6-8)
PHONO
C
TUNER
TUNER
TUNER
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
MIC
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
LIVE! MED
MAIN ADVANCED
ZONE2 IN
DIGITAL
ZONE2 ADVANCED
5.1a FILM 5.1a
INPUT SETUP
DVD2
TV
SAT
VCR
CD
TUNER
PHONO
DVD1
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
LIVE! CALIBRATION
TUNER SETUP
NONE
LIVE!
NONE
NONE
LIVE!
LIVE!
POWER MANAGEMENT
INPUTS SETUP DVD1 ANALOG IN