Lexicon RV-8 - Manual (Page 162)

Mode Adjust Lexicon
6-20
5.1 PLIIx MOV
The 5.1 PLIIx MOV (MOVIE) listening mode is designed to play back
7.1 discrete channels decoded from 5.1-channel Dolby Digital film
sources. The seven main channels are full-frequency. The .1 channel,
often referred to as LFE information, has a limited frequency range of
up to 120Hz.
The 5.1 PLIIx MOV listening mode is only available when the front, side
and rear speakers are present.
Note:
The RV-8 cannot detect Dolby Digital Surround EX encoding in
non-flagged 5.1-channel Dolby Digital input sources.
Activating the 5.1 PLIIx MOV listening mode
The 5.1 PLIIx MOV listening mode is a dynamic listening mode and
cannot be assigned as a preferred listening mode for Dolby Digital film
sources. To activate this listening mode, use the front-panel or remote
control Mode buttons.
When the DOLBY D parameter is set to USE LAST, the RV-8 will
automatically activate the dynamic 5.1 PLIIx MOV listening mode if
this listening mode was activated the last time a Dolby Digital
source was present.
Note:
The 5.1 PLIIx MOV mode will not appear in the list of available listening
modes if either the side or rear speakers are missing from the
configuration.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-39 for
detailed descriptions.
MODE ADJUST 5.1 PLIIx MOV
Parameter Default Setting Possible Settings
EX DECODING AUTO AUTO, ON, OFF
COMPRESSION OFF AUTO, ON, OFF
LFE MIX +0.0dB –10.0 to +0.0dB
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-37