Lexicon RV-8 - Manual (Page 151)

RV-8 Mode Adjust
6-9
DOLBY PL + THX
This mode is designed for playback of Dolby Surround-encoded
sources and decodes four channels: three front channels and one
mono surround channel with a high-frequency rolloff above 7kHz.
This mode is recommended for home theaters with THX-certified
speakers. Dolby PL + THX mode:
• Applies THX re-equalization to simulate high-frequency rolloffs
that occur in movie theaters. Most films are mixed for movie
theaters, and may sound too bright when played back in home
theaters without re-equalization.
• Applies THX timbre matching to minimize timbre differences
between the front and surround channels, which results in
smoother sound movements between them.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-39 for
detailed descriptions
.
DOLBY PRO LOGIC
The Dolby PRO LOGIC mode is designed for playback of Dolby
Surround-encoded sources. It decodes four channels from Dolby
Surround-encoded sources, and uses a mono surround channel
with a high-frequency rolloff above 7kHz.
This mode is useful for comparison purposes, particularly with the
L7 FILM, Dolby PLIIx MOVIE and DTS Neo:6 CIN listening mode.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-39 for
detailed descriptions
.
Parameter Default Setting Possible Settings
RE-EQUALIZER ON ON, OFF
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-37
MODE ADJUST PL +
Parameter
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-37
MODE ADJUST PRO LOGIC