Plasmon V15 - Manual (Page 28)

Plasmon V 15 AIT Tape Library User Manual
Page 26
2. Make sure the write-protect switches on the cartridges are set correctly, as shown in the
following figure. You can use a ball-point pen or similar instrument to set the write-protect
switch.
Figure 10. Data Cartridge Write Protect Switch
Installing Cartridges in Fixed Slots
1. With the magazine removed, install cartridges into the fixed slots, with the write-protect
switches down and facing out.
Figure 11. Installing Data Cartridges
Write
enabl
e
Write
protect
4
3
0
0
0
0
Fixed slots
Cartridge