Plasmon V15 - Manual (Page 98)

Plasmon V 15 AIT Tape Library User Manual
Page 96
Removing the Tape Drive
1. Disconnect the SCSI cables from the back of the tape drive. The SCSI connectors for the
tape drive are accessible from the back panel.
Figure 30. SCSI Connectors
2. From the back panel, use a #2 Phillips cross recess screwdriver to release the captive screw
that secures the tape drive carrier to the library, as shown in the following figure.
Figure 31. Removing the Tape Drive Carrier
Tape drive
SCSI connectors
Captive screws
Handle