Plasmon V15 - Manual (Page 73)

Library Operation
Page 71
2. Press [ENTER]. The screen displays the library code version. Press the down arrow key
twice until “System Statistics” displays, as shown below.
3. Press [ENTER]. The first statistic to display is Total Moves, as shown in the example below.
4. To display additional Statistics screens, press the down arrow.
The following table describes the information in the Statistics screen.
Table 12. System Statistics Screens
 S y s t e m
S t a t i s t i c s
„ T o t a l M o v e s :
1 4 2 4 0 6
System Statistic Description (1)
(1) Cumulative over the life of the library.
Total Moves The number of times the robot has picked a cartridge
and placed it in a slot or the tape drive.
Pick Retries The number of times the robot retried picking a car-
tridge.
Put Retries The number of times the robot retried placing a car-
tridge.
Rotate Retries The number of times the robot retried rotating on the
wrist axis.
PTE Retries The number of times the robot performed a position to
element (PTE) retry.
Powerup Count The number of time the library has been power
cycled.