Plasmon V15 - Manual (Page 74)

Plasmon V 15 AIT Tape Library User Manual
Page 72
Viewing System Sensors
The System Sensors screen enables you to check the current status of the library’s internal mechanical
sensors. To view system sensors:
1. From the operator panel keypad, press [MENU] to display the menus. Press the down arrow
key until “Library Information” displays, as shown below.
2. Press [ENTER]. The screen displays the library code version. Press the down arrow key until
“System Sensors” displays, as shown below.
3. Press [ENTER]. The first screen to display is Door Locked, as shown in the example below.
 L i b r a r y
I n f o r m a t i o n
 S y s t e m
S e n s o r s
„ D o o r L o c k e d :
1