Powerware 9315 - Manual (Page 68)

USING THE CONTROL PANEL
EATON Powerware ® 9315 UPS (500–750 kVA) Installation and Operation Manual S 164201244 Rev E www.powerware.com 8-12
8.5.8 Time Setup Screen
Select Time from the Setup menu to display the Time Setup screen. The Time Setup
screen allows you to set the internal time stamp of the UPS. The time stamp is used
for logging events in the Event History Log. Figure 8‐11 shows the Time Setup
screen.
Statistics Graphics Setup
Setup
Time
Uninterruptible Power System
UPS System Normal
Events Meters
Port 1
Set Time & Date
DAY DT
MON 07 MON
APR YR
99 HR:MN
15:06 SAVE
YES
Port 2
48.5
Minutes
Battery
ALARM: NONE
NOTICES: NONE
Language
4 MAY 1999 09:25:42
Figure 8‐11. Time Setup Screen
A small return arrow ( ) appears in the upper right corner of the information area of
the Time Setup screen. This arrow is a reminder that you can press the
pushbutton on the control panel to toggle the scroll bar between the menu box and
the information area. When the scroll bar is in the information area, the return arrow is
in the menu box. When the scroll bar is in the menu box, the return arrow is in the
information area.
When the scroll bar appears in the information area, you can use the pushbuttons to
change the time stamp settings. To change a setting, press the and pushbuttons
to highlight the setting you want to change. To increase the setting (make it a higher
value), press the pushbutton. To decrease the setting (make it a lower value), press
the pushbutton. To save the settings upon exit from this screen, be sure the Save
field is set to YES.