Planet Technology WGSW-2620P - Manual (Page 109)

a device with GVRP enabled, you can send a GVRP request using the VID of a VLAN defined on the
switch; the switch will automatically add that device to the existing VLAN.
802.1q VLAN interface
Click the hyperlink "Configuration" to enter the VLAN configuration interface.
Enable GVRP Protocol: checked the box to enable GVRP protocol.
Enable security VLAN setting: checked the box to enable security VLAN group. When you
select to enable security VLAN group, only the members in this VLAN group can access to
the switch. The steps of setting security VLAN refer to the following below steps in Basic
section. After you have configured the security VLAN group, you can continue to create other
VLAN groups.
"
Note : There is only one security VLAN group.
Basic
1. Click
Add
button.