Planet Technology WGSW-2620P - Manual (Page 17)

show
accounting
Privileged
EXEC
Show username &
password
Switch# show
accounting
Username: admin
Password: admin
show version User EXEC
Use the show version user
EXEC command to display
version information for the
hardware and firmware.
Switch> show
version
Firmware version:
1.0
Hardware version:
3.0
Kernel version: 1.10
show terminal
Privileged
EXEC
Use the show terminal
command to display
console information for the
switch
Switch (config)#
show terminal
Baud rate (bits/sec):
9600
Data Bits: 8
Parity Check: none
Stop Bits: 1
Flow Control: none
3.3.2.2 Port Commands Set
Commands
Command
Level
Description Defaults Example
interface
[FastEthernet
/module Ethernet]
[slot id] [id]
Interface
configuratio
n mode
Use the fast Ethernet
interface configuration
command
Switch (config)#
interface
fastEthernet 0/1