Planet Technology WGSW-2620P - Manual (Page 20)

Bandwidth [in | out]
[value]
Interface
configuratio
n mode
Set bandwidth in or out
rate. The value rage is
(0~999), and zero of the
value is disable
(The module can’t be
setting)
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
bandwidth hi 50
State [Enable |
Disable]
Interface
configuratio
n mode
Use the state interface
configuration command
to specify the state mode
of operation for Ethernet
ports. Use the disable
form of this command to
disable the port.
Enable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
state disable
show interface
configuration
Interface
configuratio
n mode
show interface
configuration status
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
show interface
configuration
show interface
status
Interface
configuratio
n mode
show interface actual
status
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
show interface
status