Planet Technology WGSW-2620P - Manual (Page 62)

3. VLAN Name: Type a name for the new VLAN, ex: VLAN01.
4. VLAN ID: Type a VID. The default is 1. There are 256 VLAN groups to provided configure.
5. Protocol VLAN: Press "Space" key to choose protocols type.
6. Member: Press "Space" key to change the member value.
Untagged: this port is the member port of this VLAN group and outgoing frames are NO
VLAN-Tagged frames.
Tagged: this port is the member port of this VLAN group and outgoing frames are
VLAN-Tagged frames.
NO: it means that the port is NOT member of this VLAN group.
7. Press "ESC" key to go back action menu line.
8. Select <Apply> to apply the configuration.
"
Note : If the trunk groups exist, you can see it (ex: Trunk1, Trunk2…) on the port list, and you can
configure it is the member of the VLAN or not.
Create VLAN Group: 802.1Q interface
3.4.5.3 Edit / Delete VLAN Group
User can edit or delete a VLAN group.
1. Select <Edit> or <Delete> action.
2. Select the VLAN group that you want to edit or delete, then press enter.
3. In <Edit> action, user can modify the member port and remove some member ports from this
VLAN group.
"
Note :