Planet Technology WGSW-2620P - Manual (Page 37)

snmp
system-location
[SystemLocation]
Global
configuratio
n mode
Set Snmp agent
system location
N/A
Switch (config)# snmp
system-location lab
snmp
system-contact
[SystemContact]
Global
configuratio
n mode
Set Snmp agent
system contact
N/A
Switch (config)# snmp
system-contact where
snmp
community-strings
[Community] right
[RO | RW]
Or
no snmp
community-strings
[Community]
Global
configuratio
n mode
Add snmp
community string.
Use the no form of
this command to
remove the
specified
community.
PUBLIC
RO
Switch (config)# snmp
community-strings
public right RW
Snmp-server host
[host-address]
community
community-string
Global
configuratio
n mode
Configure SNMP
server host
information and
community string
N/A
Switch (config)#
snmp-server host
192.168.0.10
community rw
No snmp-server
host
Global
configuratio
n mode
Delete the snmp
server host setting
N/A
Switch (config)# no
snmp-server host
3.3.2.10 Port Mirroring Commands Set
Commands
Command
Level
Description Defaults Example
port monitor
[RX|TX|Both
|Disable] PortList
Or
Interface
configuratio
n mode
Use the port
monitor interface
configuration
command to
enable Switch Port
N/A
Switch (config)#
Interface fastEthernet
0/8
Switch (config-if)# port