Planet Technology WGSW-2620P - Manual (Page 112)

7. To set the outgoing frames are VLAN-Tagged frames or untagged. Then click
Apply
button.
Tag: outgoing frames with VLAN-Tagged.
Untag: outgoing frames without VLAN-Tagged.
Port VID: Configure port VID settings
1. VLAN ID: set the port VLAN ID that will be assigned to untagged traffic on a given port. This
feature is useful for accommodating devices that you want to participate in the VLAN but that don't
support tagging. The switch each port allows user to set one VLAN ID, the range is 1~255, default
VLAN ID is 1. The VLAN ID must as same as the VLAN ID that the port belong to VLAN group, or
the untagged traffic will be dropped.
2. Ingress Filtering: Ingress filtering lets frames belonging to a specific VLAN to be forwarded if the
port belongs to that VLAN.
Enable: Forward only packets with VID matching this port's configured VID.
Disable: Disable Ingress filter function
3. Acceptable Frame type:
ALL: Acceptable all Packet
Tag Only: Only packet with match VLAN ID can be permission to go through the port.
4. Click
Apply
button.