7 mac address configuration, 1 static mac address – Planet Technology WGSW-2620P User Manual
Page 65
3.4.7 MAC Address Configuration
When you add a static MAC address, it remains in the switch's address table, regardless of whether the
device is physically connected to the switch. This saves the switch from having to re-learn a device's
MAC address when the disconnected or powered-off device is active on the network again. You can add /
modify / delete a static MAC address.
MAC Address Configuration interface
3.4.7.1 Static MAC Address
Add the Static MAC Address
You can add static MAC address in switch MAC table.
1. Select
<Add>
--> <Edit> key to add the static MAC address.
2.
MAC Address:
Enter the MAC address of the port that should permanently forward traffic,
regardless of the device network activity.
3.
Port No.:
press "Space" key to select the port number.
4.
VLAN ID:
select the VLAN ID that the added Mac address belongs to.
5. Press
"ESC"
to go back action menu line.
6. Select
<Apply>
to apply all configure value.