2 per port configuration, 3 misc configuration – Planet Technology WGSW-2620P User Manual
Page 120
802.1x Configuration - System Configuration interface
4.7.14.2 Per port Configuration
1.
Select the port in Port column.
2.
Select the state of port. There are four states:
Reject:
the specified port is required to be held in the Unauthorized state.
Accept:
the specified port is required to be held in the Authorized state.
Authorized:
the specified port is set to the Authorized or Unauthorized state in accordance
with the outcome of an authentication exchange between the Supplicant and the
authentication server.
Disable:
The specified port is required to be held in the Authorized state.
3. Click
Apply
button.
4.
You can see the every port Authorization information list in table.
802.1x Configuration - Per Port Configuration
4.7.14.3 Misc Configuration
1.
Quiet period:
Set the period during which the port doesn't try to acquire a supplicant.
2.
TX period:
Set the period the port waits to retransmit next EAPOL PDU during an authentication
session.
3.
Supplicant timeout:
Set the period of time the switch waits for a supplicant response to an EAP
request.
4.
Server timeout:
Set the period of time the switch waits for a server response to an authentication