Planet Technology WGSW-2620P - Manual (Page 97)

Switch basic setting interface
4.7.2.2 Advanced Setting
Queue Service. After the configuration, click
Apply
button to complete the configuration.
„ MAC Address Table Entry
Age-out Time: fill in the number of seconds that an inactive MAC address remains in the switch's
address table. The valid range is 300~765 seconds. Default is 300 seconds.
Max Bridge Transmit Delay Bound Control: limit the packets queuing time in switch. If enable,
the packets queued exceed will be drop. This valid value are 1sec, 2 sec, 4 sec and off.
Enable Low Queue Delay Bound: limit the low priority packets queuing time in switch. If the low
priority packet stays in switch exceed Max Delay Time, it will be sent. The valid range is 1~255 ms.
"
Note : Make sure of "Max bridge transit delay bound control" is enabled before enable Delay
Bound, because Enable Delay Bound must be work under "Max bridge transit delay bound control
is enabled" situation.
Broadcast Storm Filter Mode: configure broadcast storm control. Enable it and set the upper
threshold for individual ports. The threshold is the percentage of the port's total bandwidth used by
broadcast traffic. When broadcast traffic for a port rises above the threshold you set, broadcast
storm control becomes active. The valid threshold values are 5%, 10%, 15%, 20%, 25% and off.