Planet Technology WGSW-2620P - Manual (Page 30)

receive a bridge
protocol
data unit (BPDU)
message from the
root switch within
this interval, it
recomputes the
Spanning Tree
Protocol (STP)
topology. Use the
no form of this
command to return
to the default
interval.
spanning-tree
hello-time
[seconds]
Global
configuratio
n mode
Use the
spanning-tree
hello-time global
configuration
command to
specify the interval
between hello
bridge protocol
data units
(BPDUs). Use the
no form of this
command to return
to the default
interval.
2 sec.
Switch (config)#
spanning-tree
hello-time 3
stp-path-cost
[PortCost]
Interface
configuratio
n mode
Use the
spanning-tree cost
interface
configuration
command to set
the path cost for
Spanning Tree
10 Mbps
– 100
100 Mbps
Switch (config)#
interface fastEthernet
0/2
Switch (config-if)#
stp-path-cost 20