Planet Technology WGSW-2620P - Manual (Page 29)

spanning-tree [on /
off] or no
spanning-tree
Global
configuratio
n mode
Use the
spanning-tree
global
configuration
command to
enable Spanning
Tree Protocol
(STP). Use the no
form of the
command to
restore to default
Disable
Switch (config)#
spanning-tree on
spanning-tree
priority [number]
Global
configuratio
n mode
Use the
spanning-tree
max-age global
configuration
command to
change the priority.
Use the no form of
this command to
return to the
default interval.
32768
Switch (config)#
spanning-tree priority
32767
spanning-tree
max-age [seconds]
Global
configuratio
n mode
Use the
spanning-tree
max-age global
configuration
command to
change the
interval between
messages the
spanning tree
receives from the
root switch. If a
switch does not
20 sec
Switch (config)#
spanning-tree max-age
15