Planet Technology WGSW-2620P User Manual
Page 18
Use the module Ethernet
interface configuration
command
Switch (config)#
interface
moduleEthernet
1/1
Use the duplex
configuration command
to specify the duplex
mode of operation for
Fast
Ethernet.
Auto
Switch (config)#
interface
fastEthernet
0/1
Switch (config-if)#
duplex full
duplex [full | half|
auto]
Interface
configuratio
n mode
Use the duplex
configuration command
to specify the duplex
mode of operation for
module Ethernet.
Auto
Switch (config)#
interface
moduleEthernet
1/1
Switch (config-if)#
duplex full
speed
[10 | 100 | 1000 |
auto]
Interface
configuratio
n mode
Use the speed
configuration command
to specify the speed
mode of operation for
Fast Ethernet.
Auto
Switch (config)#
interface
fastEthernet
0/1
Switch (config-if)#
speed
10
speed [10| 100 |
1000 | auto]
Interface
configuratio
n mode
Use the speed
configuration command
to specify the speed
mode of operation for
module
Ethernet.
(The 100Base-FX
module only supported
Switch (config)#
interface
fastEthernet 1/2
Switch (config-if)#
speed
1000