Planet Technology WGSW-2620P - Manual (Page 23)

vlanmode [disable|
portbase| 802.1q |
gvrp]
VLAN
database
mode
To set switch VLAN
mode .Use the no form of
this command to restore
to default.
Disable
Switch (vlan)#
vlanmode 802.1q
Port Base VLAN
vlan [Group Name]
grpid [Group ID]
port [Port Number]
VLAN
database
mode
Add new Port Base VLAN
Switch
(vlan)# vlan
v2 grpid 2
port 1-4
no vlan Group
Name] [Group ID]
VLAN
database
mode
Delete port base VLAN group
Switch
(vlan)# no
vlan v2 2
show vlan
[GroupName]
[GroupID] or show
vlan
VLAN
database
mode
Show VLAN of Group Name
or Group ID information
Switch
(vlan)#
Show vlan
v2 2
vlan [Group name]
add [port Number]
[tagged | untagged]
VLAN
database
mode
Set the port of some port
group tagged or untagged
Switch
(vlan)# vlan
v2 add 5
vlan [Group name]
delete [port
Number]
VLAN
database
mode
Remove the port from it’s port
group.
Switch
(vlan)# vlan
v2 delete 5
802.1Q | 802.1Q with GVRP VLAN mode
vlan [Group name]
vlanid [Vlan ID] port
[port Number] tag
[port Number]
VLAN
database
mode
Add new 802.1Q VLAN
[VLAN name]:
VLAN name
[VLAN ID]: 1 ~ 4094
Switch(vlan
)# vlan v2
vlanid 2
port 1-4
tag 2-4