Planet Technology WGSW-2620P - Manual (Page 22)

port group
[group-number]
[port-list] lacp [on |
off] workp [work
ports]
no port group
[group-number]
lacp [on | off] workp
[work ports]
Global
configuratio
n mode
Add trunking group.
Use the no form of this
command to delete
trunking group.
Disable
LACP:
Switch (config)#
port group 1 1-4
lacp on workp 2
Trunk without
LACP:
Switch (config)#
port group 1 1-4
lacp off workp 4
port group
[group-number]
activityport
[port-list]
Global
configuratio
n mode
Set trunking group port
active
Switch (config)#
port group 3
activityport 2-4
Trunk.1 Lacp:
Enable
Check OK!
NEW: 2 4
Update finished!!
3.3.2.4 VLAN Commands Set
Commands
Command
Level
Description Defaults Example
Vlan datatbase
Privileged
EXEC
mode
To enter the VLAN
configuration interface
Switch# vlan
database
Switch(vlan)#