Planet Technology WGSW-2620P - Manual (Page 123)

4.9 Configuration Backup
In Configuration Backup, you can restore the backup configuration into the switch. Also, you can backup
the configuration to TFTP server.
4.9.1 TFTP Restore Configuration
You can restore EEPROM value from TFTP server, but you must put back image in TFTP server, switch
will download back flash image.
1. TFTP Server IP Address: fill in the TFTP server IP.
2. Restore File Name: fill in the correct restore file name.
3. Click
Apply
button.
TFTP Restore Configuration interface
4.9.2 TFTP Backup Configuration
You can save current EEPROM value from the switch to TFTP server, then go to the TFTP restore
configuration page to restore the EEPROM value.
1. TFTP Server IP Address: fill in the TFTP server IP
2. Backup File Name: fill the file name
3. Click
Apply
button.