Panasonic SX-KN2600 - Manual (Page 113)

Part V Composer
113
QQTG0692
Co
m
p
os
e
r
MEASURE COPY
Copy recorded data of specified measures to a
specified point.
• On the destination track, the new data
replaces the current measure contents.
1. Specify the measures you wish to copy from
the source track (FROM).
• On the FROM side, specify the settings with
the corresponding buttons.
PART:
Select the part to copy from. (If ALL is
selected, all parts are copied.)
FIRST MEASURE:
Specify the first measure to copy.
LAST MEASURE:
Specify the last measure to copy.
2. Specify where you wish to copy the selected
measures to.
• On the TO side, specify the settings with the
corresponding buttons.
PART:
Select the part to copy to.
START MEASURE:
Specify the start point to copy the selected
measures to.
3. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• If the FROM and TO parts are the same and
the FROM and TO measures overlap, copy is
not possible.
MEASURE ERASE
Erase the recorded contents of specific mea-
sures.
• Note that only the contents of the measures
are erased, not the measures themselves; the
length of the performance remains the same.
1. Use the PART
∧
and
∨
buttons to specify the
part.
• If ALL is selected, data is erased from the
specified measures of all the parts at one time.
2. Use the FIRST MEASURE
∧
and
∨
buttons to
specify the start point (measure number).
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number).
4. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
10_Part V.fm 113 ページ ２００３年１月２７日 月曜日 午後１時４５分