Panasonic SX-KN2600 - Manual (Page 168)

Part X Sound Edit
168
QQTG0692
So
un
d Edi
t
Effect Edit
These are settings related to the various effects applied to your edited sound.
EFFECT
1. On the SOUND EDIT menu display, select
EFFECT.
• The display looks similar to the following.
2. Use the CHORUS ON/OFF buttons set CHO-
RUS to on or off. Use the respective DEPTH
∧
and
∨
buttons to specify how the CHORUS is
applied.
3. Use the REVERB ADJUST
∧ and ∨
buttons to
specify how the REVERB is applied.
4. Use the MONO/POLY
∧ and ∨
buttons to
select the sound output mode.
5. Use the PORTAMENTO ON/OFF buttons set
portamento to on or off. Use the TIME
∧ and ∨
buttons to set the portamento time.
ⅢⅢⅢⅢ
DIGITAL EFFECT
1. Use the PAGE buttons to view the 2/2 display.
• The display looks similar to the following.
• The display for the effect type which is best-
suited for the sound currently being edited is
selected.
2. Use the TYPE
∧ and ∨
buttons to select the
type of effect.
<ON/OFF button>
Specify whether the DIGITAL EFFECT button
turns on or off when the sound is selected.
When set to ON, the DIGITAL EFFECT button
turns on automatically when the sound is
selected.
<STEREO/MONO button>
Select stereo (STEREO) or monaural (MONO)
output of the effect.
3. Use the buttons along the bottom of the dis-
play to select the attribute you wish to adjust.
• When the type is changed, the parameters
revert to the factory defaults.
15_Part X.fm 168 ページ ２００３年２月５日 水曜日 午後１時５５分