Panasonic SX-KN2600 - Manual (Page 170)

Part X Sound Edit
170
QQTG0692
So
un
d Edi
t
3. Use the buttons below the display to assign a
name.
• Set the character input position with the POSI-
TION buttons, select the characters with the
alphanumeric buttons and repeat name
assignment.
• Switch from upper to lower case letters with
the ABC, abc button.
• Press the INS button to enter a space at the
cursor position.
• Press the DEL button to erase the character at
the cursor position.
• Press the CLR button to erase the entire
name.
• Press the →← button to center the name.
4. When you have finished typing the name,
press the OK button.
• The display returns to the MEMORY WRITE
display.
5. Use the
∧ and ∨
buttons to select the MEM-
ORY number in which to store the new sound
(1–40).
6. Press the OK button.
• The new sound is stored, and “COMPLETED!”
is shown on the display.
• The SOUND EDIT mode is turned off.
• The stored sound memories can be saved on
a disk/an SD card for recall at a later time.
(Refer to pages 125, 140.)
Select a new sound
You can select your original sound just like the
other sounds in the SOUND GROUP.
1. In the SOUND GROUP section, press the
MEMORY button.
• The list of sounds is shown on the display.
2. Select the desired sound from the list on the
display.
MEMORY
15_Part X.fm 170 ページ ２００３年２月５日 水曜日 午後１時５５分