Part iv sequencer – Panasonic SX-KN2600 User Manual

Page 85

Advertising
background image

Part IV

Sequencer

85

QQTG0692

Se

qu

en

ce

r

6.

During playback, press the PUNCH IN button
at the point you want to begin recording.

• Recording begins as soon as the PUNCH IN

button is pressed. Begin playing at this point.

• The REC indication changes to the PUNCH

indication.

• The PUNCH IN button switches to the REC

STOP button.

7.

Press the REC STOP button at the point you
want to stop recording.

• Punch recording stops immediately.

• You can also begin punch-in recording by

playing the keyboard.

• You can specify the punch-in/punch-out points

with the optional Foot Switch (sold sepa-
rately). (Refer to page 172.)

ⅢⅢⅢⅢ

AUTO PUNCH RECORD

You can also set the punch-in and punch-out
points beforehand, so that recording automati-
cally begins and ends at the specified points.

1.

On the PUNCH RECORD display, press the
AUTO: OFF button.

• The display looks similar to the following.

2.

Use the FIRST MEASURE

and

buttons to

specify the number of the punch-in measure.

3.

Use the LAST MEASURE

and

buttons to

specify the number of the punch-out measure.

• The number of the LAST measure must be

higher than the number of the FIRST mea-
sure.

• The specified measure is recorded.

4.

Use the COUNT IN MEASURE

and

but-

tons to specify the number of lead-in mea-
sures you wish to have played back before the
punch-in measure.

• Set the metronome to on or off with the ON or

OFF button.

5.

Press the EXIT button.

• The display changes to the PUNCH RECORD

display.

6.

Press the START/STOP button.

• Playback begins from the measure indicated

by CURRENT MEASURE on the display.

• Pertinent information, such as the FIRST

MEASURE, is shown in the upper section of
the display.

7.

Correct the performance.

• The mode changes automatically to the

recording mode at the specified FIRST mea-
sure. Begin playing at this point. The mode
automatically changes back to the playback
mode at the specified LAST measure.

• To discontinue punch recording in the middle,

press the CANCEL button. In this case, the
recorded contents up to that point are erased.

09_Part IV.fm 85 ページ 2003年2月5日 水曜日 午後1時34分

Advertising
This manual is related to the following products: