Panasonic SX-KN2600 - Manual (Page 152)

Part VIII Sound
152
QQTG0692
So
un
d
Master Tuning
This setting is used to fine-tune the pitch of the entire instrument. This is convenient when the Keyboard is
played with other instruments or with a recorded performance.
1. On the SOUND MENU display, select
MASTER TUNING.
• The display changes to the following.
2. Use the
∧
and
∨
buttons to adjust the pitch.
Key Scaling
For each part you can change the tuning of each key within a one-octave range. In addition to equal tem-
perament tuning, you can perform in other types of scales, for example Arabic tuning.
1. On the SOUND MENU display, select KEY
SCALING.
• The display looks similar to the following.
2. Press the OCTAVE TUNING TEMPLATE but-
ton.
• The display looks similar to the following.
3. Use the PART
∧
and
∨
buttons to select the
part to set.
• If ALL is selected, all the parts are set at once.
4. Use the TYPE
∧
and
∨
buttons to select the
type of tuning.
• Select from FLAT, WERCKMEISTER, KIRN-
BERGER, ARABIC 1 to 5, SLENDRO, and
PELOG.
5. Use the SHIFT
∧
and
∨
buttons to select the
key to perform in.
6. Repeat steps 3 to 5 for each part, as neces-
sary.
7. Press the SET button.
• The OCTAVE TUNING for the specified type
and key is automatically set.
■ ■ ■ ■ Settings for each key.
On the KEY SCALING display, you can adjust
the tuning for each key.
After selecting a key with the KEY SELECT ᮤ
and ᮣ buttons, the pitch can be adjusted using
the TUNING
∧
and
∨
buttons.
• The pitch can be raised or lowered by a maxi-
mum of one half-tone.
• You can use the PART SELECT
∧
and
∨
but-
tons to switch the part.
• Use the ALL PARTS INITIAL button to return
all parts to the flat tuning.
13_Part VIII.fm 152 ページ ２００３年２月５日 水曜日 午後１時５１分