Panasonic SX-KN2600 - Manual (Page 128)

Part VI Disk Drive (KN2400)
128
QQTG0692
D
isk D
riv
e (
K
N
2
400
)
7. Use the 1 MEASURE SPACE buttons to
select ON or OFF.
ON:
A one-measure space is added to the
beginning of the file.
OFF:
No space is added.
• When there is various data other than perfor-
mance data stored at the beginning of a file,
the start of playback may be delayed. This can
be avoided by set the 1 MEASURE SPACE to
ON to inserting a before the beginning of the
performance.
• When set to ON, a space is added each time a
file is saved. Therefore, if you have already
saved a file once with the 1 MEASURE
SPACE set to ON, please set it to OFF each
time the file is subsequently saved.
8. Use the SAVE AS button to select the sound
generator mode (GM/GM2/NX).
9. Press the SAVE button.
• The SAVE operation begins.
• When the operation has been successfully
completed, “COMPLETED!” is shown on the
display.
• If you attempt to save data to a file name in
which data is currently saved, the display
changes to the confirmation display. Press the
YES button to continue the SAVE procedure,
or press the NO button if you wish to cancel it.
Disk management
Various disk management procedures, such as file delete, file copy, and disk format, are available from
the DISK TOOLS menu.
DISK TOOLS
1. Insert the disk into the Disk Drive slot.
2. On the DISK MENU display, select DISK
TOOLS from the display.
• The display looks similar to the following.
3. Select a function and follow the procedure to
execute it.
• Use the buttons below the display to select a
file.
• You can press the SMF/TECH button to
change to the display for procedures related to
SMF/TECH files.
• Use the buttons to the left and right of the dis-
play to access the corresponding setting dis-
play.
ⅢⅢⅢⅢ
RENAME:
Assign a name to a file.
ⅢⅢⅢⅢ
DEL:
Delete a file.
ⅢⅢⅢⅢ COPY (TECH):
Copy a file.
ⅢⅢⅢⅢ
MOVE (TECH):
Replace a file.
ⅢⅢⅢⅢ
INFO (DISK/SONG) (SMF files only):
Select whether to display the disk data or the
song names.
ⅢⅢⅢⅢ
FORMAT
Disks which are used for the first time with this
instrument have to be formatted through the fol-
lowing procedure. When an unformatted disk is
inserted into the Disk Drive slot and you attempt
to execute the save or load procedure, the DISK
FORMAT display appears. Follow the instruc-
tions shown to format the disk.
11_Part VI.fm 128 ページ ２００３年２月５日 水曜日 午後２時４３分