Mode setting, Input/output setting, Part xiii midi – Panasonic SX-KN2600 User Manual

Page 183

Advertising
background image

Part XIII

MIDI

183

QQTG0692

MI

DI

Mode Setting

Initialize the settings for when the NX SOUND or GM LEVEL 2 mode is ON.

1.

On the MIDI MENU display, select MODE
SETTING.

• The display looks similar to the following.

2.

Select the mode.

• There are two modes for GM LEVEL 2

depending on the parts to use.

• The confirmation display appears. Press the

YES button to execute the function, or press
the NO button to cancel the function.

Input/output Setting

Make the settings which determine how various performance data is treated during data transmission and
reception.

1.

On the MIDI MENU display, select
INPUT/OUTPUT SETTING.

• The display looks similar to the following.

2.

Use the

▲ and ▼ buttons to select the item.

RIGHT 1 INPUT

CONDUCTOR:

When data for the RIGHT 1 part is received,
the CONDUCTOR determines which part it
is used for.

DIRECT:

When data for the RIGHT 1 part is received,
it is treated as RIGHT 1 data, and perform-
ance data for all parts is received on their
respective basic channels.

AUTO PLAY CHORD INPUT

ON: Input data for the ACCOMP, BASS, APC

and CHORD parts is received.

OFF: Data for the above parts is not received.

• MIDI channels should be assigned to the

above parts before exchanging data.

VELOCITY INPUT

DIRECT:

The VELOCITY value of received NOTE
ON data is treated as is.

OFFSET:

The VELOCITY value of received NOTE
ON data is offset (

−50 to 50).

• Select VELOCITY OFFSET VALUE. Use

the

and

buttons to change the value.

• All the values are offset from the current

value by the fixed amount.

• The upper (127) and lower (1) limits can-

not be exceeded.

FIX:

The VELOCITY value of all received NOTE
ON data is set to a fixed value. (1 to 127)
• Select VELOCITY FIXED VALUE. Use

the

and

buttons to change the value.

TECHNI-CHORD OUTPUT

ON: Keyboard notes generated by the

TECHNI-CHORD function are also trans-
mitted.

OFF: Only key note data of the pressed keys

is transmitted.

TRANSPOSE OUTPUT

ON: The note data of the transposed notes is

transmitted.

OFF: The note data of the played keys is

transmitted.

18_Part XIII.fm 183 ページ 2003年2月5日 水曜日 午後2時0分

Advertising
This manual is related to the following products: