Loading data, Sd load, Part vii sd card (kn2600) – Panasonic SX-KN2600 User Manual

Page 133

Advertising
background image

Part VII

SD Card (KN2600)

133

QQTG0692

S

D

C

a

rd

(

K

N

2

600

)

Loading data

Load the data from the SD card to this instrument’s memories.
• Note that the load procedure causes any data which is currently stored in the relevant memories to be

erased.

SD LOAD

Load data that saved to a card into this instru-
ment’s memory.

1.

Insert the SD card with the stored data into the
SD slot. (See page 131.)

• Close the lid securely.

2.

Press the SD button to turn it on.

3.

On the SD MENU display, select LOAD.

• The display looks similar to the following.

• If there are only SMF files on the card, the dis-

play automatically changes to the SD-SOUND
(SMF) LOAD display.

4.

Use the buttons to the right of the display to
select the type of loading.

FOLDER:

Select files to load from a list of all folders and
of saved songs in each folder.

ALPHABET (See page 134.)

Select files to load from an alphabetical list of
all songs.

NUMBER (See page 134.)

Select files to load specifying folder and song
numbers.

• The priority that sets which display is shown

first can be set at the SD PREFERENCES dis-
play. (Refer to page 145.)

ⅢⅢⅢⅢ

FOLDER

1.

Use the buttons below the display to select the
SONG you wish to load.

• Select the folder name first, and then select

the SONG name.

• Press the PREV button for the previous page

and the NEXT button for the next page.

2.

Press the LOAD button.

• The LOAD operation begins.
• When the operation has been successfully

completed, “COMPLETED!” is shown on the
display.

• If song data was loaded, you can press the

START/STOP button to begin playback when
the SEQUENCER PLAY display is active.

• You can load the type of data for which only

one song can be recorded in the SEQUEN-
CER
. (This type is available for cards used
with older Technics models.) Note, however,
that in this case, the song is loaded into
SONG 1, but the data in SONG memories 2 to
10 are erased.

• You can also access the LOAD display by

pressing the SD button for a few seconds.

LOAD

S D

SD IN USE

12_Part VII.fm 133 ページ 2003年3月9日 日曜日 午後3時5分

Advertising
This manual is related to the following products: