Panasonic SX-KN2600 - Manual (Page 44)

Part I Sounds and effects
44
QQTG0692
S
o
u
n
d
s
an
d ef
fe
ct
s
MIC
You can add reverb and other effects to sound
from a connected microphone.
• Connect a microphone to this instrument.
(Refer to page 188.)
1. Set the PROGRAM MENUS button to ON.
• The display will appear as follows:
2. Select REVERB & EFFECT.
3. Select MIC REVERB & EFFECT.
• The display looks similar to the following.
4. Set using the button on the left of the display.
Select the effect name (MIC REVERB/MIC
EFFECT).
5. Set the MIC REVERB.
• Use the PARAMETER ▲ and ▼ buttons to
select an attribute, and use the VALUE
∧
and
∨ buttons to adjust the corresponding setting.
• You can specify whether or not to apply the
reverb with the MIC REV ON/OFF button.
6. Set MIC EFFECT.
• Use the PARAMETER ▲ and ▼ buttons to
select an attribute, and use the VALUE
∧
and
∨ buttons to adjust the corresponding setting.
• Enable or disable the effect using the MIC
EFF ON/OFF button.
PROGRAM
MENUS
06_Part I.fm 44 ページ ２００３年２月５日 水曜日 午後２時３８分