Filter edit, Pitch envelope touch & key follow, Filter & equalizer – Panasonic SX-KN2600 User Manual

Page 163: Part x sound edit

Advertising
background image

Part X

Sound Edit

163

QQTG0692

So

un

d Edi

t

PITCH ENVELOPE TOUCH & KEY FOLLOW

Specify how the pitch envelope changes in rela-
tion to note pitch.

1.

Use the PAGE buttons to view the 4/4 display.

2.

Use the buttons to left of the display to select a
tone.

• Use the

▲ and ▼ buttons to select a setting

item and then the

and

buttons to specify a

selection.

3.

Use the TOUCH

and

buttons to change

the respective touch settings.

• Use the TIME

and

buttons to specify the

time change depending on touch. Use the
LEVEL

and

buttons to specify the pitch

change level depending on touch.

• At a

− setting, the softer the keys are pressed,

the greater the change. At a

+ setting, the

harder the keys are pressed, the greater the
change.

4.

Change the key follow settings for the
ATTACK, DECAY and RELEASE.

• Use the

and

buttons corresponding to the

ENVELOPE KEY FOLLOW attributes to
adjust the settings. Use the CENTER

and

buttons to select the center of the bend direc-
tion.

Filter Edit

Make major changes to the sound by eliminating specific frequency ranges.

FILTER & EQUALIZER

1.

On the SOUND EDIT menu, select FILTER.

• The display looks similar to the following.

2.

Use the buttons to the left of the display to
select a tone.

• Use the

▲ and ▼ buttons to select a setting

item and then the

and

buttons to specify a

selection.

3.

Use the MODE button to select the filter mode.

LPF(6)

+EQ (low-pass filter + equalizer)

Signals higher than the cut-off frequency are
cut. Normal sounds are softened.

HPF(6)

+EQ (high-pass filter + equalizer)

Signals lower than the cut-off frequency are
cut. Normal sounds are sharpened.

LPF24 (low-pass filter 24)

A stronger low-pass filter than LPF

+EQ.

HPF24 (high-pass filter 24)

A stronger high-pass filter than HPF

+EQ.

BPF (band-pass filter)

Cuts off signals that are not within in the area
between the two specified CUTOFF frequen-
cies.

• For this mode, adjust the settings on the

EQUALIZER/FILTER side as well.

THRU

No filter effect is applied.

15_Part X.fm 163 ページ 2003年2月5日 水曜日 午後1時55分

Advertising
This manual is related to the following products: