NEC NX7700i/5040H-32 - Manual (Page 110)

Base Module
855-900547-200 2-74
2.4.6.8. HE (Help)
m b u
X X X
* Always valid without regard to the current system status.
Function:
This command is used to show a command list.
(“HELP” is also usable as well as “HE.”)
(Screen Example)
Description
No.
iSPyz:---> he <ENTER>
iSP commands :
System Control (both customers and maintenance persons)
DF – Shut down the system (override)
DN - Shut down the system
DP - Generate the system dump interrupt
PC - Power cycle
RS - Cold reset the system
UB – Bring up BIOS
UP - Bring up the System
Configuration (both customers and maintenance persons)
HC - Hardware configuration and partitioning
Miscellaneous (both customers and maintenance persons)
CM - Change SP command mode to maintenance mode
DT - SP Date and Time
EN - Display environmental information
FV - Display firmware versions
HE - Display this help
ML - Display message log
Settings (both customers and maintenance persons)
SG – SP/System settings
SR - Save and restore system CMOS/NvRAM to/from FTP server
(a)
HE command terminated.
(Description)
Description
No.
Description
(a) Shows the help for commands.