NEC NX7700i/5040H-32 - Manual (Page 72)

Base Module
855-900547-200 2-36
2.4.6.1. DF (Shut down System Power <override>)
m b u
X
* The command is executable to the active partition (after automatic system boot/UP
command execution).
Function:
This command is used to shut down the system DC power.
It shuts down the system power overriding the current OS or BIOS state, notifying nothing to
them. (It is equivalent to a Power button override on systems having a physical Power button.)
(Screen Example)
Description
No.
iSPyz:---> df <ENTER>
CAUTION: System power will be turned off without any notice to the softwares
even if they are running.
Enter partition number (0-7/all/CR=exit) : all <ENTER> (a)
Execute OK? (y/[n]) y <ENTER> (b)
DF command was accepted. System power of all partitions will be turned off
soon.
(c)
mm/dd/yyyy HH:MM:SS 0------- System shutdown started. (SPFW:Rxx.xx)
:
(d)
*************************************************
* Waiting 2 minutes for cooling components. *
* DC power is still active. *
*************************************************
* DO NOT turn off AC power. *
*************************************************
(e)
mm/dd/yyyy HH:MM:SS 0------- System shutdown completed. (SPFW:Rxx.xx)
[iSP0m:INFO.2042]
************************************************
* All DC power has been turned off. *
* You can turn off AC power. *
************************************************
(f)