NEC NX7700i/5040H-32 - Manual (Page 87)

Base Module
855-900547-200 2-51
cmd arg1 arg2 arg3 arg4 Description
- - - - This command is currently not supported.
This command can be used to swap a CELL
with another CELL while the software is
running (it is not a combination of
attach/detach commands, but provides a
function exclusive to this command).
If no argument is specified or an argument
has an error, the swap command help opens.
While this command is valid to running
partitions, it is only functional when it is used
with the OS that supports online
attach/detach capability.
This command is supported on the 32Way(B)
and 8Way models.
swap
cellx celly - - Swap a running CELL having physical CELL
number x with another CELL having physical
CELL number y.
CELLy must be the one that is not attached
to any partition.
For CELL swapping, an invalid partition is
needed to which no CELLs or IOXs belong.
When swapping is complete, CELLx is
detached from the partition, while CELLy is
attached to it.
Logical CELL number is transferred from
CELLx to CELLy.
- - - - This command is only supported on the ISPF
model. It is not supported on any other
models.
Use this command to set the size of the
memory area shared by partitions.
If no argument is specified or an argument
has an error, the smem command help
opens.
This command is valid to partitions that are
not running. smem
n mmm - - Set the shared memory size for the partition
with partition number n, in a GB increment.
It is not allowed to change the shared
memory size for active partitions.
No shared memory is used if 0 is specified.
- - - - This command is only supported on the
32Way(B) model. It is not supported on any
other models.
Use this command to set the size of the
memory used for inter-CELL interleaving. If
no argument is specified or an argument has
an error, the cmem command help opens.
This command is valid to inactive partitions. cmem
n mmm - - Set the memory size for inter-CELL
interleaving for partition number n, in a GB
increment.
No interleaving is used if 0 is specified.
Numbers that are not multiples of 16 GB will
be rounded to multiples of 16 GB.