NEC NX7700i/5040H-32 User Manual

Page 117

Advertising
background image

Base Module

855-900547-200

2-81

SP default FTP Server Configuration:

Category

Configuration Parameter

Default Setting

IP address for the default FTP server

N/A

Account for the default FTP server (up to 20
characters)
[Account is case-sensitive.]

N/A

Password for the default FTP server, used in pair
with the account (password is not echoed. Up to 78
characters may be used.)
[Password is case-sensitive.]

N/A

FTP Server

Name of the folder to save auto notification
messages (up to 30 characters). Two-byte
characters or space character are not allowed for
the folder name. Characters that are not usable as
folder names on the FTP server are not allowed
either.

N/A

SP SNMP Configuration:

Category

Configuration Parameter

Default Setting

Manager IP

address [0]

IP address for SNMP manager.
Up to two managers can be configured.

N/A

Manager IP

address1

[ISPF only]

IP address for SNMP manager.
Up to two managers can be configured, and up to
two IP addresses are assignable for each manager.
Two IP addresses, if assigned to a manager, must
have different subnet addresses.

N/A

Community names for use on the SNMP.
(Up to 3 community names are usable for TRAP,
information acquisition, and information setting
purposes. Up to 16 characters are usable for a
community name.)
[Community name is case-sensitive.]

“public”

Specifies whether message authentication with
higher security using MD5 is to be used with the
SNMP manager.

off

Key data for message authentication with higher
security using MD5 used with the SNMP manager
(key data has a 16-byte length).
[Key data is not echoed.]

N/A

Community

name

System ID used for communications with the
SNMP manager (up to 8 characters are usable).
This system ID is also used for ESMPRO and for
collaboration between ESMPRO and VOE (*1).
A system ID must be set in advance to ESMPRO
installation.

N/A

SNMP

VOE (*4)

collaboration

Specifies whether or not collaboration is made with
VOE (*1), if it exists in the system.

no

(*4) VOE represents SystemGlobe GlobalMaster.

Advertising
This manual is related to the following products: