NEC NX7700i/5040H-32 - Manual (Page 93)

Base Module
855-900547-200 2-57
cmd arg1 arg2 arg3 arg4 Description
pcibx - - - Connect PCI Bays to the partitions to which
they belong.
x: Physical PCI Bay number (0-7)
This command is supported on the 32Way(B)
model.
- - - - This command is currently not supported.
This command can be used to dynamically
disconnect currently online components
(CELL, XBX Card, and PCI Bay) from the
system while the OS is running.
If this command attempts to disrupt the
current system operation, it will be rejected.
This command remains invalid while any of
the partitions within the system is booting up,
shutting down, or handling an error.
The CELL and PCI Bay are functional only if
they are used in conjunction with the OS that
supports this command.
If no argument is specified or an argument
has an error, the offline command help
opens.
This command is supported on the
32Way(B), 8Way, and ISPF models. It is not
supported on the 32Way(H) model.
cellx - - - Disconnect the CELL Cards from the system
and shut off their power. The CELL that
controls the Compatibility PCI is unable to be
disconnected.
The ISPF is not the target of this command.
xbxcx - - - Disconnect the XBX Cards from the system.
On the 32Way(B) model, they must always
be disconnected in pairs: i.e. XBX Cards 0
and 2 or 1 and 3. It is not allowed to
disconnect a single XBX Card alone.
The XBX Cards are unable to be
disconnected on the 8Way model.
xbxc0 portx Disconnect the inter-XBX external interface
that connects cabinets.
x: XBX port number (4-5)
This command is supported on the ISPF
System on which the OS is running (ACPI S0
State).
offline
pcibx - - - Disconnect the PCI Bay from the system and
shut off its power. It is not allowed to
disconnect the PCI Bay that contains the
Compatibility PCI.
This command is supported on the 32Way(B)
model.
led - - - - Use this command to turn on/off the LEDs
used for device location checkout.
If no argument is specified or an argument
has an error, the led command help opens.
This command is always valid to the CLK,
XBX, and CELL Cards along with the PCI
Bay regardless of the current system state.
It is valid to the PCI slot only if the host GXB
or PXH is online.